You have no items in your shopping basket.


More Views

Iron-on Vinyl - Metallic Gold

Qty Available: 0



Iron-on metallic vinyl

Iron-On metallic vinyl is designed to be pressed to one or both sides of fabric or felt.

Shapes may be cut from the vinyl before placing onto your project using scissors, or a by using a cutting machine such as a Sizzix die-cutter, Brother Scan'n'Cut or Cricut.

Vinyl is 48cm wide. Price is per metre.



Always pretest on a small piece of your fabric or felt.

  1. Preheat iron to high heat with no steam.
  2. Place vinyl on fabric, leaving the clear protective sheet on top. 
  3. Place a cotton cloth on top of the vinyl to protect your iron. 
  4. Press and hold iron on the protective cloth for approximately 10 seconds. Repeat until entire surface is laminated.
  5. Flip project over. Press and hold iron on back of project for additional 4 seconds.
  6. Remove protective film from the vinyl
  7. Do not touch iron directly to vinyl. If there are any bubbles or patches that have not bonded, place protective cloth back over project and re-press with iron.

Additional Information

Content PU
Width 50cm
Colour Silver
Motif Size No
Brand No
Country of manufacture China

You may also be interested in the following product(s)